Trouble Shooting » Clutch Cover » No Pedal (pressure)
Bearing Retainer Clip
Indicator:
No pressure at clutch pedal (after installation of a Pull-Type clutch)
Cause:
1. Incorrect fitting procedure
2. Damaged bearing retainer clip upon installation
3. Incorrect clutch for orientation
4. Poor handling procedure
Effect:
Bearing not located in pressure plate
Action:
1. Replace bearing clip/Cover
2. Show care when fitting the clutch and installation of the gearbox
3. Ensure the clutch fork is fitted in the correct direction
4. Show care when handling the covers ensuring never to pick the clutch up by its centre
Trouble Shooting
- Clutch Cover
-
Clutch Disc
- Difficult Disengagement(10)
- Loss of Drive(5)
- Noise & Vibration(3)
- Other(2)
- Shudder (judder)(3)
- Slipping(6)
- Clutch Master Cylinder(1)
- Clutch Slave Cylinder(1)
- Clutch Spigot Bearing, bush (pilot bearing)
-
CSC (concentric slave cylinder)
- CSC Leaking(1)
- Loss of Fluid(5)
- Other(1)
- Flywheel
- Thrust Bearing
- Vehicle Diagnostics(6)