Broken Segments
Indicator:
Loss of drive/Noisy when operating the clutch pedal
Cause:
1. Clutch disc has been over torqued - example: down changing from 5th to 2nd gear at high speed
2. Severe engine to gearbox mis-alignment - Red dust will be present when alignment issues are present.
3. Clutch disc has been overloaded
4. Damaged pilot bearing/bush
5. Damaged upon fitment
Effect:
The disc outer has come off the drive hub
Action:
1. Replace the clutch disc
2. Check all engine to gearbox dowels are present and in a serviceable condition (If necessary replace)
3. Replace pilot bearing/bush
4. Show care when fitting the gearbox making sure there is no possibility of damaging the drive up causing the spring fatigue (hanging the gearbox on the clutch disc)
5. Driver education
Trouble Shooting
- Clutch Cover
-
Clutch Disc
- Difficult Disengagement(10)
- Loss of Drive(5)
- Noise & Vibration(3)
- Other(2)
- Shudder (judder)(3)
- Slipping(6)
- Clutch Master Cylinder(1)
- Clutch Slave Cylinder(1)
- Clutch Spigot Bearing, bush (pilot bearing)
-
CSC (concentric slave cylinder)
- CSC Leaking(1)
- Loss of Fluid(5)
- Other(1)
- Flywheel
- Thrust Bearing
- Vehicle Diagnostics(6)