Insufficient Lubrication of the Spline
Indicator
Difficult to dis-engage gears
Cause
1. Insufficient lubrication of the clutch disc spline
2. Dirty/Contaminated splines on the gearbox
Effect
Dry splines on the clutch disc and red dust may be present
Action
1. Clean the input shaft splines removing any old grease or old clutch dust
2. Lubricate the splines (refer the fitting video https://www.youtube.com/watch?v=OrH7gCmjF-o)
Trouble Shooting
- Clutch Cover
-
Clutch Disc
- Difficult Disengagement(10)
- Loss of Drive(5)
- Noise & Vibration(3)
- Other(2)
- Shudder (judder)(3)
- Slipping(6)
- Clutch Master Cylinder(1)
- Clutch Slave Cylinder(1)
- Clutch Spigot Bearing, bush (pilot bearing)
-
CSC (concentric slave cylinder)
- CSC Leaking(1)
- Loss of Fluid(5)
- Other(1)
- Flywheel
- Thrust Bearing
- Vehicle Diagnostics(6)
